|Housing dimension:||335 * 335 * 935 mm||Housing color:||Bule, Orange, White|
|Arm length & height:||100* 45 mm/ 80*45mm(swing out )||Arm length:||Max. 6mtrs|
|Housing material:||2mm cold roller steel plate||Product name:||CE Approved Intelligent Barrier Gates Automatic Telescopic Boom Barrier|
CE Approved Intelligent Barrier Gates Automatic Telescopic Boom Barrier
|Working temperature||-40°C to +75°C|
|Power supply||220V±10% / 110V±10%|
|Opening time||1s, 3s, and 6s|
Model Selection and Differences
Max Boom Length
180 degree, Articulated boom
180 degree, Articulated boom
Functions & Features
1) Manual release
2) Machine core with compression spring, effectively avoids the accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photocell electrical limit switch/motor memory sensor)
6) Reversing on obstacle
8) Support the INFRARER PHTOCELL for anti-bumping function (optional)
9) Support the external and internal VEHICLE LOOP DETECTOR (optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)
1. By-security. The barrier gate will automatically go back when meet obstacles during closing.
2. AC motor is more powerful and no maintenance.
3. Barrier Beam/arm can be chosen from 3 meters to 6 meters, and barrier gate
4. closing time is also arranged from 1 second to 6 seconds.
5. The barrier gate can be both right-installed and left-installed.
6. All the operation process is soft without any noise and shaking.
7. Infrared photocell interface, Loop detector interface and IC system
8. interface are reserved for the other functions.
9. Green light and red light are used inside for indication the position of the beam.
220V±10%, 110V±10%, 50/60HZ
Remote control distance
Max boom length
Motor Rotational speed
1.One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltae.
3. The surfaces of the system destroyed by wrong installation our use.
4. Broken by natural disaster.
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if there is any.
The explaining authority of this product instruction and service article belong to the production factory.
Communication with customers
1) Q: Motor running but automatic barrier gate arm no action?
Barrier arm at 45° position where is hard to move
Unlock clutch and manually rotate arm to horizontal or vertical position then try again
Tension of balancing spring not suitable
Adjust spring exactly
Low working voltage
Check the voltage and power
2) Q: When opening/closing, automatic barrier gate arm cannot reach right position (90° vertical
& 180° horizontal)?
Length adjustment of connecting rod not correct
Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line
Nuts on the limit switch loose
Tighten the nuts when arm at 90° vertical and 180° horizontal position