บ้าน ผลิตภัณฑ์ประตูรั้วอัตโนมัติ

Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell

Wonsun is a very reliable company, fast shipment and good quality, the most important is competitive prices.

—— Ali Alabadi

I really recommend, a great team and good quality. Very good. I will buy again.

—— Oliver

สนทนาออนไลน์ตอนนี้ฉัน

Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell

ประเทศจีน Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell ผู้ผลิต

ภาพใหญ่ :  Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell

รายละเอียดสินค้า:

Place of Origin: China
ชื่อแบรนด์: WONSUN
ได้รับการรับรอง: CE, ISO, SGS
Model Number: DZTP-128-B

การชำระเงิน:

จำนวนสั่งซื้อขั้นต่ำ: 1 ชิ้น
ราคา: negotiation
Packaging Details: Packed in bubble wrap firstly, and then reinforced with carton for outer packing.
เวลาการส่งมอบ: 3-7 วันทำการหลังจากได้รับการชำระเงินแล้ว
เงื่อนไขการชำระเงิน: T / T, Western Union, Money Gram, อาลีบาบาประกันการค้า, Paypal เป็นต้น
สามารถในการผลิต: 1000 ชุด/เดือน
Contact Now
รายละเอียดสินค้า
Name: 4S Automatic Barrier Gate With Loop Detector and Photocell For Parking System Rating Voltage: 220V±10%, 110V±10%, 50/60HZ
Max boom length: 8 meters Operation time: 0.6s.0.8s1s, 1.8s, 3s, 4s.6s. Customized
Protection Degree: IP44 G.W: 50 KG

Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell

 

What is the davantages of Wonsun barriers?

 

1)The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again.

2)Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring.

3)Three control buttons:for boom raising, falling and pausing.

4)Boom backtrack function:the boom will rise if hits something when falling.

5)Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.

6)Both external and internal loop detectors are supported.

7)"open","close" and "stop" controlling interfaces.

8)RS-485 communication serial interface(optional)

9)Traffic light signal connection device: red light for stop,green light for pass.

10)Remote control and wire control for selection.

 


Model Selection and Differences

 

Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell

 


Specifications

 

Model

WST1211

Working Temperature

-40℃~+75℃

Voltage

220V±10%, 110V±10%, 50/60HZ

Rated power

80W

Relative humidity

≤90%

Remote control distance

≥30m

Net weight

48kgs

Speed

1S,1.8S,3S, 6S

Max boom length

6 meters

Motor Rotational speed

1400rmp

Protection Degree

IP44

 


 1 pcs Gate Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book

 


Communication with customers
 
1)     Q: Connected power and press open/close button but traffic barrier gate no action?

 

A

Reason

Solution

1

Fuse blown

Check fuse and power in controller

2

Battery of remote control powered off

Change a new one

3

External protection circuit break or at protecting status

Open the barrier door and click OPEN/CLOSE button on control box

4

Same frequency interference

Check photocell and loop detector

 
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?

 

A

Reason

Solution

1

Limit switch

Adjust the horizontal/vertical limit switch to correct position

2

Main controller failure

Change a new one

 
3)   Q: Motor running but traffic barrier gate arm no action?

 

A

Reason

Solution

1

Barrier arm at 45° position where is hard to move

Unlock clutch and manually rotate arm to horizontal or vertical position then try again

2

Tension of balancing spring not suitable

Adjust spring exactly

3

Low working voltage

Check the voltage and power

 
4)  Q: When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?

 

A.

Reason

Solution

1

Length adjustment of connecting rod not correct

Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line

2

Nuts on the limit switch loose

Tighten the nuts when arm at 90° vertical and 180° horizontal 

 

 

 

 

Basic Features:

 

1)By-security. the barrier gate will automatically go back when meet obstacles during closing. 

2)AC motor is more powerful and no maintenance.

3)Barrier Boom/arm can be chosen from 3 meters to 6 meters, and barrier gate.

4)Closing time is also arranged from 1 second to 6 seconds.

5)The barrier gate can be both right-installed and left-installed.

6)All the operation process is soft without any noise and shaking.

7)Infrared photocell interface, loop detector interface and IC system.

8)interface are reserved for the other functions.

9)Green light and red light are used inside for indication the position of the boom

 

 

Advanced Features:

 

1)clutch key can be used to open the clutch when power off.

2)Fan cooling machine reduce the motor temperature by high frequency using, never get heat-protecting, unique temperature calefaction design for low temperature using, prevent freezing in cold weather.

3)Exactitude aluminium alloy die-casting motor base reduce the noise and joint abrasion to prolong the barrier gate working life.

รายละเอียดการติดต่อ
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

ผู้ติดต่อ: Sarah Lee

โทร: +8613751381783

ส่งคำถามของคุณกับเราโดยตรง (0 / 3000)

ผลิตภัณฑ์อื่น ๆ